MAC Industrial COS

Efficient and Flexible Large Industrial Cell Casting

The MAC Industrial COS uses an inlet conveyor which is configured with a lug aligning device to properly position the cells. Then the robot picks up the cells coming from the inlet conveyor, over to the brushing station, then the flux/tin/flux station, into the mold, and finally handing the cast cells off into the case insertion station to be lowered into cases. After insertion, the conveyor takes the cases out of the station and new cases are fed in.

The MAC Advantage

300-900 cells in 8 hours, depending on design
Cycle times typically 1-2 minutes with either one or two cells each cycle
Tight tuning of mold water cooling rates increases bond quality
Standard robot handles 5 to 33 plate cells, one or two simultaneously
Multiple robot sizes available

Includes complete safety cage with easy access doors
Includes automatic cell-load-into-case station

Optional robot tooling changer to reduce change over time
Can be arranged to fit your space requirements
CE Conformity Certification available

The MAC Advantage

300-900 cells in 8 hours, depending on design
Cycle times typically 1-2 minutes with either one or two cells each cycle
Tight tuning of mold water cooling rates increases bond quality
Standard robot handles 5 to 33 plate cells, one or two simultaneously
Multiple robot sizes available
- Includes complete safety cage with easy access doors
- Includes automatic cell-load-into-case station
- Optional robot tooling changer to reduce change over time
- Can be arranged to fit your space requirements
- CE Conformity Certification available