Industrial supraMAC Paster

The Industrial supraMAC Paster uses hydraulic power to move the grids through the paster which results in better wrap around the grid wires. Hydraulic controls deliver the cylinder pressure and motor torque required for heavy duty industrial pasting while maintaining a compact footprint. The standard 711 mm (28 in) hopper can be replaced with a 457, 559, 610, or 628 mm (18, 22, 24, 24.75 in) wide hopper. It can also be used with the roll-away, shuttle, or hand feeder for oversized or different shaped grids. After pasting, a textured pattern is applied to both sides of the finished plate by two finishing rolls mounted after the hopper to improve plate performance.

Overpaste thickness tolerance of ± 0.25 mm (0.01 in)
Feeder Speeds:
- Hanging: Up to 110 panels per minutes
- Shuttle: Up to 75 panels per minute
- Thicker paste improves bond quality to grid
- Individual speed adjustments for feeder, hopper, and pasting belt
- Over 95% operation up-time with less than 1% scrap can be anticipated

		Minimum	Maximum
Hand Feeder	Plate Width	102 mm/4 in	711 mm/28 in
	Plate Length	102 mm/4 in	1016 mm/40 in
Hanging Feeder	Plate Width	143 mm/5.625 in	254 mm/10 in
	Plate Length	203 mm/8 in	711 mm/28 in
Shuttle Feeder	Plate Width	143 mm/5.625 in	302 mm/13 in
	Plate Length	254 mm/10 in	711 mm/28 in
All Feeders	Plate Thickness	2 mm/0.080 in	9.5 mm/0.375 in

Industrial supraMAC Paster

Hydraulic Pasting with MAC Precision

Equipment to Integrate with your Industrial supraMAC Paster