Premiere supplier of custom industrial automation equipment.
+1-269-925-3295
optaMAC Flash Dry Oven
MAC's Premiere Battery Plate Flash Dry Oven
MAC's Premiere Battery Plate Flash Dry Oven
The optaMAC Oven, available in gas or electric, features a standard 7036 mm (277 in) heated section utilizing 100% convection heat.
Upper and lower ducts use forced convection heat to dry the top and bottom surfaces of the pasted plate without over drying the plate’s center. A 1,750 CFM power-assisted exhaust increases drying efficiency and maintains negative pressure inside the oven. This results in a cooler ambient temperature outside the oven and less distribution of lead into the factory air.
When the surface-dried plates exit the oven they are fed to a MAC High Speed Stacker with In-Line Aligner, a MAC High Speed Stacker with Stack Aligner Brushing, or shingled horizontally onto an *optional 3 m (10 ft) off-bearing conveyor attached to, and driven by the oven.
The optaMAC Oven, available in gas or electric, features a standard 7036 mm (277 in) heated section utilizing 100% convection heat.
Upper and lower ducts use forced convection heat to dry the top and bottom surfaces of the pasted plate without over drying the plate’s center. A 1,750 CFM power-assisted exhaust increases drying efficiency and maintains negative pressure inside the oven. This results in a cooler ambient temperature outside the oven and less distribution of lead into the factory air.
When the surface-dried plates exit the oven they are fed to a MAC High Speed Stacker with In-Line Aligner, a MAC High Speed Stacker with Stack Aligner Brushing, or shingled horizontally onto an *optional 3 m (10 ft) off-bearing conveyor attached to, and driven by the oven.
The MAC Advantage
- Easy access internal oven clean-out doors
- 20-25% savings in energy over other ovens
- Heated sections are available in any size at a minimum of 6096 mm (240 in)
- Stainless and carbon steel construction with industrial grade rust preventive exterior coat of paint
- Modifications Available for Use with Other MAC Equipment
- Speed synchronization with MAC’s X610, XM610, Steel Belt, and Fixed Orifice pasters
- Acid resistant kit for use with MAC Acid Surfacer
- Redundant Safety Systems
- Negative pressure exhaust fan
- Automatic shut-off high temp limit switch
- Fan pressure switches ensure proper function before oven can start
The MAC Advantage
- Easy access internal oven clean-out doors
- 20-25% savings in energy over other ovens
- Heated sections are available in any size at a minimum of 6096 mm (240 in)
- Stainless and carbon steel construction with industrial grade rust preventive exterior coat of paint
- Redundant Safety Systems
- Negative pressure exhaust fan
- Automatic shut-off high temp limit switch
- Fan pressure switches ensure proper function before oven can start
- Modifications Available for Use with Other MAC Equipment :
- Speed synchronization with MAC X610, XM610, Steel Belt, and Fixed Orifice pasters
- Acid resistant kit for use with MAC Acid Surfacer