MAC Steel Belt Paster

The MAC Steel Belt Paster pastes continuous lines using a high tensile strength steel belt and Full Coverage Continuous (FCC) double sided pasting technology. The FCC system on the paster and hopper supports the grid strip off the pasting belt at the precise point before the paste is dispensed from the hopper. Two paper feeders are used to apply perforated paper to the top and bottom of the grid to improve adhesion and release paste from the steel belt. The MAC Uncoiler (sold separately) is used to feed the uncoiled strip directly into the paster. Both paster and hopper feature a heavy-duty greasing manifold, which enables grease application without interrupting production.

• Speeds up to 55 m (180 ft) per minute
• 305 mm (12 in) or 381 mm (15 in) hopper width available
• Top side overpaste from 0.10 to 0.25 mm (0.004 to 0.010 in)
• Bottom side overpaste of approximately 0.17 to 0.25 mm (0.007 to 0.10 in)
• Plate thickness tolerance capability of ± 0.08 mm (0.003 in)
• Strip width (lugs excluded) from 152 to 381 mm (6 to 15 in)

• Large diameter rolls for longer belt life
• Hollow bore wash-down reducers for belt and hopper drives
• 7.5 HP inverter for belt drive and 10 HP inverter for hopper drive
• Independent hopper featuring orifice type tooling and automatic hold-down clamps that
  secure the hopper to the paster
• Variable frequency drive gear motors for hopper, belt, and finishing roll
• Top and bottom paper feeders that each hold two 558 mm (22 in) diameter paper rolls
• Customer’s choice of English or metric fasteners
• Equipment is made to customer’s electrical requirements
• Industrial grade rust preventive paint in color of customer’s choice. (Safety blue is stock.)

• MAC Hopper Leveling System
• Analog Sensor Readout
• CE Conformity Certification
• Spare parts available for all MAC equipment

• Personnel: One
• Electrical Requirements: 220-480V, 3 phase, 50-60 Hz, 22.0 kVA maximum
• Compressed Air: (Clean/dry) Hopper Raise/Lower 118m³/hr @ 7kPa
  [70 CFM @ 80 PSI]
• Height with Hopper Up: 1684 mm (66.31 in)
• Ventilation: Not Applicable
• Water: Only for cleaning.
• Approximate Shipping Weights and Dimensions:
  2,360 kg (5,204 lb)
  2388 x 1626 x 1626 mm (94 x 64 x 64 in)