Battery Panel Parter Cleans Lugs, and Parts Panels

The MACparter 190 combines panel parting, lug brushing, and lug trimming all into one quick, smooth operation. It is designed to handle both formed, and unformed panels while reducing lead in the air when connected to a proper ventilation system. A mechanical or vacuum feeder smoothly feeds plates into horizontal processing position. Once in position the lugs are brushed, clearing oxide without carving grooves into the metal surface that could retain wet flux. The MACparter 190 produces minimal vibration ensuring the lugs are clipped to the proper length, and the panels are accurately parted. A single twist crank adjusts both the feeder and chain carriers simultaneously, so handling new plate sizes only takes minutes.

• 70—190 panels per minute
• Change panel size in two minutes
• Change knives in ten minutes
• Center Cutting Tolerance: ± 1 mm (0.040 in) with 3 mm (0.120 in) required in center of panel (from top of bottom border to top of adjoining bottom border)
• Side stabilizer alignment system to reduce side-to-side pasted panel movement
• Lighted clear plastic dust hoods on front and top of machine deflect dust to center of machine for removal by 203 mm (8 in) exhaust duct
• Automatic safety switch stops machine if dust hoods are lifted
• Panel Thickness: 1 to 3 mm (0.040 to 0.125 in)
• Panel Height: 102 to 152 mm (4 to 6 in)
  Panel Width (without lugs): 203 to 330 mm (8 to 13 in)
  Lug Length (standard): 11 to 32 mm (0.44 to 1.25 in

• Air exhaust work table
• Horizontal conveyor chains with side panel guides
• Four 152 mm (6 in) steel wire brushes
• Customer’s choice of English or metric fasteners
• Equipment is made to customer’s electrical requirements
• Industrial grade paint in a color of customer’s choice (Standard is safety blue.)

• Adjustable lug trimming knives
• Long Lug Modification – To allow handling of panels with lugs longer than 32 mm (1.25 in)
• CE Conformity Certification
• Spare parts available for all MAC equipment

• Personnel Required: Two, or three semi-skilled (depending upon production speed)
• Electrical Requirements: 220-480V 3 phase 60 Hz
• Ventilation (Parter): 1,600 CFM
• Ventilation (Air Exhaust Work Table): 2,900 CFM
• Water: None
• Compressed Air: None
• Approximate Shipping Weights  and Dimensions – Parter:
  903 kg (1,991 lbs)
  2134 x 1448 x 1575 mm (84 x 57 x 62 in)
• Approximate Weights and Dimensions –
  Air Exhaust Work Table and Off-bearing Conveyor
  380 kg (838 lbs)
  2134 x 1143 x 1194 mm (84 x 45 x 47 in