Automatic or Manual Cell-to-Cell and Cell-to-Atmosphere Sealed Battery Tester

The MAC Leak Tester is an automatic or manually operated leak detecting station designed to test for internal (cell-to-cell) and external (cell-to-atmosphere) leakage using pressure and/or vacuum. Both tests can be done in one cycle. A combination vacuum pump and compressed air drive the test system. Pressure transducers monitor the test pressures. The tester includes all pneumatic and electric components, along with a test fixture in a framed unit. A green or red light indicates to the operator the batteries are good or bad. An automatic rejection conveyor removes batteries from the line that have failed testing. Failed batteries are sent to a reject station for refurbishing. All MAC equipment comes in industrial grade rust preventive safety blue paint. This built-to-last unit will provide you with higher quality control for your battery products for years to come.

• Automatic or manual operation (one operator for manual)
• Rejection conveyor to automatically remove failed batteries onto a reject station for refurbishing
• 2-4 batteries per minute depending on battery configuration
• Handles batteries from 6-12 volt up to 8-D size
• Tests for internal (cell-to-cell) and external (cell-to-atmosphere) leakage using pressure and/or vacuum
• Both tests can be done in one cycle

• Personnel: One (manual machine only)
• Electrical: As required by customer needs
• Compressed Air: 2.25 CFM @ 80 psi with 1/2 NPT connection
• Ventilation: Customer supplied as needed to meet local requirements.
• Approximate Weights and Dimensions:
  • 329 kg (729 lb)
  • 908 x 1213 x 1607 mm (36 x 48 x 63 in)